Tiger bearing stainless steel - adjustable with oilamide sliding block
The ALFATEC Tiger bearing with a diameter of 77,7 mm has an adjustable slider. The axial guide is implemented with an Oilamid slider. The welded-in bolt and the outer ring are made of stainless steel (1.4301) and are thus protected against corrosion. The support is achieved through a plastic slide bushing. Spacer rings are used to adjust the axial clearance. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 7,2 kN in the radial direction and up to 4 kN in the axial direction.
The Tiger bearing TR080.0390 at a glance:
- protected against corrosion
- made completely of stainless steel
- no lubrication necessary
- axial clearance adjustable via spacer rings
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP080.0780.
It is optionally available with a welded-on mounting element for easy screw-on assembly. In, amongst others, version TR080.0390BQ4000.
Easy adjustment of the axial guide bearing can be optimally accomplished with our spacer rings DR080.4905 and DR080.4910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
The Tiger bearing comes in versions including a chrome-plated version and a heavy-duty stainless steel version and is available in numerous other series.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|installation height :||39,5 mm|
|diameter Ø :||77,7 mm|
|material :||stainless steel|
|welding diameter :||40 mm|
|load capacity radial:||7,2 kN|
|load capacity axial:||4 kN|
The suitable profile for TR080.0390
TR080.0390 available as welded unit with one of the following fixing element. Fixing elements can be adjusted according to customer specifications.
the suitable equipment for TR080.0390