The ALFATEC Tiger bearing with a diameter of 52,5 mm has an adjustable slider. The axial guide is implemented with an Oilamid slider. The welded-in bolt and the outer ring are made of stainless steel (1.4301) and are thus protected against corrosion. The support is achieved through a plastic slide bushing. Spacer rings are used to adjust the axial clearance. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 3,5 kN in the radial direction and up to 2 kN in the axial direction.
The Tiger bearing TR050.0390 at a glance:
- protected against corrosion
- made completely of stainless steel
- no lubrication necessary
- axial clearance adjustable via spacer rings
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP050.0780.
It is optionally available with a welded-on mounting element for easy screw-on assembly. In, amongst others, version TR050.0390BQ4000.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|installation height :||28 mm|
|diameter Ø :||52,5 mm|
|material :||stainless steel|
|welding diameter :||30 mm|
|load capacity radial:||3,5 kN|
|load capacity axial:||2 kN|
The suitable profile for TR050.0390
TR050.0390 available as welded unit with one of the following fixing element. Fixing elements can be adjusted according to customer specifications.
the suitable equipment for TR050.0390