TR070.1360
Tiger bearing - oilamide sliding block adjustable via spacer rings
The ALFATEC Tiger bearing with a diameter of 70,1 mm has a stud bolt and an adjustable oilamide sliding block. The axial guide is implemented with an Oilamid slider. Spacer rings are used to adjust the axial clearance. For assembly, screw-in of the stud bolt is all that is necessary. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 11,40 kN in the radial direction and up to 3,15 kN in the axial direction.
The Tiger bearing TR070.1360 at a glance:
- lubricated for life
- axial clearance adjustable via spacer rings
- easy installation
- easy adjustment
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP070.0700.
Easy adjustment of the oilamide sliding block can be optimally accomplished with our spacer rings DR070.0905 and DR070.0910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
The Tiger bearing with stud bolt is available in versions such as an eccentric ring version and an adjustable axial bearing version and is available in numerous other series.
adjustable (axial) : | yes |
adjustabe (radial) : | no |
diameter Ø : | 70,1 mm |
Type : | 70 |
material : | steel |
load capacity radial: | 11,40 kN |
load capacity axial: | 3,15 kN |
C: | 45,50 kN |
C0: | 51,00 kN |
C0a: | 14,00 kN |
Ca: | 13,00 kN |

The suitable profile for TR070.1360
Artikel-Nr.: UP070.0700
Artikel-Nr.: IP070.0800
the suitable equipment for TR070.1360
Artikel-Nr.: DR070.0905
Artikel-Nr.: DR070.0910
