Tiger bearing - oilamide sliding block adjustable via spacer rings
The ALFATEC Tiger bearing with a diameter of 62,5 mm has a stud bolt and an eccentric ring. The axial guide is implemented with an Oilamid slider. Adjustment in the radial direction with the eccentric ring is also possible. For assembly, screw-in of the stud bolt is all that is necessary. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 8,87 KN in the radial direction and up to 2,95 KN in the axial direction.
The Tiger bearing TR060.1360E at a glance:
- radial clearance adjustable via eccentric ring
- axial clearance adjustable via spacer rings
- easy installation
- easy adjustment
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP060.0700.
Easy adjustment of the oilamide sliding block can be optimally accomplished with our spacer rings DR060.0905 and DR060.0910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
The Tiger bearing with stud bolt is available in versions such as an adjustable Oilamid slider or an adjustable axial bearing version and is available in numerous other series.
|adjustable (axial) :||yes|
|adjustabe (radial) :||yes|
|diameter Ø :||62,5 mm|
|load capacity radial:||8,87 kN|
|load capacity axial:||2,95 kN|
The suitable profile for TR060.1360E
the suitable equipment for TR060.1360E