Tiger bearing chrome coated - adjustable with oilamide sliding block
The ALFATEC Tiger bearing with a diameter of 77,1 mm has an adjustable slider. The axial guide is implemented with an Oilamid slider. The welded-in bolt is made of stainless steel (1.4301). The outer ring is chrome-plated and thus protected against corrosion. Spacer rings are used to adjust the axial clearance. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 12,87 kN in the radial direction and up to 5 kN in the axial direction.
The Tiger bearing TR080.0380 at a glance:
- protected against corrosion
- highly loadable in the axial direction when idle
- axial clearance adjustable via spacer rings
- easy adjustment
- lubricated for life
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP080.0780.
It is optionally available with a welded-on mounting element for easy screw-on assembly. In, amongst others, version TR080.0380BQ4000.
Easy adjustment of the axial guide bearing can be optimally accomplished with our spacer rings DR080.4905 and DR080.4910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
The Tiger bearing comes in versions including a stainless steel version and is available in numerous other series.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|installation height :||39,5 mm|
|diameter Ø :||77,1 mm|
|welding diameter :||40 mm|
|load capacity radial:||12,87 kN|
|load capacity axial:||5 kN|
The suitable profile for TR080.0380
TR080.0380 available as welded unit with one of the following fixing element. Fixing elements can be adjusted according to customer specifications.
the suitable equipment for TR080.0380