Tiger bearing - axial bearing adjustable via spacer rings
The ALFATEC Tiger bearing with a diameter of 77,7 mm has a stud bolt and an adjustable axial bearing. Spacer rings are used to adjust the axial clearance. For assembly, screw-in of the stud bolt is all that is necessary. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 12,87 kN in the radial direction and up to 5,00 kN in the axial direction.
The Tiger bearing TR080.1300 at a glance:
- easy assembly with stud bolt
- axial clearance adjustable via spacer rings
- lubricated for life
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP080.0700.
Easy adjustment of the axial guide bearing can be optimally accomplished with our spacer rings DR080.0905 and DR080.0910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
The Tiger bearing with stud bolt is available in versions such as an eccentric ring version or with an adjustable slider and is available in numerous other series.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|diameter Ø :||77,7 mm|
|load capacity radial:||12,87 kN|
|load capacity axial:||5,00 kN|
The suitable profile for TR080.1300
the suitable equipment for TR080.1300