Tiger bearing - axial bearing adjustable via spacer rings
The ALFATEC Tiger bearing with a diameter of 62,5 mm has a screw-on bolt and an adjustable axial bearing. Assembly is easy with four screws in the bolt. Spacer rings are used to adjust the axial clearance. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 8,87 kN in the radial direction and up to 2,95 kN in the axial direction.
The Tiger bearing TR060.4300 at a glance:
- easy installation
- axial clearance adjustable via spacer rings
- low maintenance
- easy adjustment
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP060.0700.
Easy adjustment of the axial guide bearing can be optimally accomplished with our spacer rings DR060.0905 and DR060.0910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|diameter Ø :||62,5 mm|
|load capacity radial:||8,87 kN|
|load capacity axial:||2,95 kN|
The suitable profile for TR060.4300
the suitable equipment for TR060.4300