Tiger bearing - adjustable with oilamide sliding block
The ALFATEC Tiger bearing with a diameter of 88,4 mm has an adjustable slider. The axial guide is implemented with an Oilamid slider. Spacer rings are used to adjust the axial clearance. Through its combined execution with a radial and axial guide, the Tiger bearing has minimal installation space requirements and features impressive robustness and a high load capacity of up to 20,37 kN in the radial direction and up to 5,10 kN in the axial direction.
The Tiger bearing TR090.0360 at a glance:
- highly loadable in the axial direction when idle
- axial clearance adjustable via spacer rings
- easy adjustment
- lubricated for life
A guide profile is required in addition to each Tiger bearing. The matching guide profile is UP090.0700.
It is optionally available with a welded-on mounting element for easy screw-on assembly. In, amongst others, version TR090.0360BQ1000.
Easy adjustment of the axial guide bearing can be optimally accomplished with our spacer rings DR090.0905 and DR090.0910.
Moreover, ALFATEC offers the Tiger bearing in different sizes for low and high loads.
The Tiger bearing comes in different versions including an adjustable axial bearing version or with a brass slider and is available in numerous other series.
|adjustable (axial) :||no|
|adjustabe (radial) :||no|
|installation height :||48 mm|
|diameter Ø :||88,4 mm|
|welding diameter :||45 mm|
|load capacity radial:||20,37 kN|
|load capacity axial:||5,10 kN|
The suitable profile for TR090.0360
TR090.0360 available as welded unit with one of the following fixing element. Fixing elements can be adjusted according to customer specifications.
the suitable equipment for TR090.0360