The ALFATEC Mammoth bearing with a diameter of 340 mm has an adjustable axial bearing. An eccentric ring is used to adjust the axial clearance. The Mammoth bearing is suitable for extremely high loads of up to 260 kN in the radial direction and up to 51 kN in the axial direction.
The Mammoth bearing MR340.0610 at a glance:
- axial clearance adjustable via eccentric ring
- easy adjustment
A guide profile is required in addition to each Mammoth bearing. The matching guide profile is MP340.0852-1.
Moreover, ALFATEC offers the Mammoth bearing in different sizes for low and high loads.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|welded installation height max. :||120 mm|
|welded installation height min. :||120 mm|
|diameter Ø :||340 mm|
|welding diameter :||140 mm|
|load capacity radial:||260 kN|
|load capacity axial:||51 kN|