The ALFATEC heavy-duty Tiger bearing with a diameter of 77,7 mm has an external axial bearing and is welded to a mounting plate. The welded-in bolt, outer ring and complete welded assembly are made of stainless steel (1.4301) and are thus protected against corrosion. It can withstand up to 40% higher loads in the axial direction and thus increases the load capacity to 3 kN in the axial direction and 7,2 kN in the radial direction.
The heavy-duty Tiger bearing STR080.4200 at a glance:
- protected against corrosion
- made completely of stainless steel
- optimum use in structures with projecting loads
- lubricated for life
A guide profile is required in addition to each heavy-duty Tiger bearing. The matching guide profile is UP080.0780.
Moreover, ALFATEC offers the heavy-duty Tiger bearing in different sizes for low and high loads.
|adjustable (axial) :||yes|
|adjustabe (radial) :||no|
|diameter Ø :||77,7 mm|
|material :||stainless steel|
|load capacity radial:||7,2 kN|
|load capacity axial:||3 kN|
The suitable profile for STR080.4200
the suitable equipment for STR080.4200