The heavy-duty guideway unit consists of one load bearing and one eccentric bearing fastened on a mounting plate. The eccentric roller can be set for play minimisation on both sides. Through its execution with a combined radial and axial guide bearing, the installation space is optimally utilised. It can withstand up to 40% higher loads in the axial direction and thus increases the load capacity to 13,00 kN in the axial direction and 20,37 kN in the radial direction.
The heavy-duty guide unit SFE090.5200 at a glance:
- play minimised since both sides are adjustable
- optimal use of installation space
- axial bearing with 40% higher load capacity
- optimum use in structures with projecting loads
A guide profile is required in addition to each heavy-duty guideway unit. The matching guide profile is UP090.0700.
Moreover, ALFATEC offers the heavy-duty guideway unit in different sizes for low and high loads.
|adjustable (axial) :||no|
|adjustabe (radial) :||yes|
|diameter Ø :||88,4 mm|
|load capacity radial:||20,37 kN|
|load capacity axial:||13,00 kN|
The suitable profile for SFE090.5200