SFE080.5200
heavy duty guideway unit - excentric bearing adjustable
The heavy-duty guideway unit consists of one load bearing and one eccentric bearing fastened on a mounting plate. The eccentric roller can be set for play minimisation on both sides. Through its execution with a combined radial and axial guide bearing, the installation space is optimally utilised. It can withstand up to 40% higher loads in the axial direction and thus increases the load capacity to 11,00 kN in the axial direction and 12,87 kN in the radial direction.
The heavy-duty guide unit SFE080.5200 at a glance:
- play minimised since both sides are adjustable
- optimal use of installation space
- axial bearing with 40% higher load capacity
- optimum use in structures with projecting loads
A guide profile is required in addition to each heavy-duty guideway unit. The matching guide profile is UP080.0700.
Moreover, ALFATEC offers the heavy-duty guideway unit in different sizes for low and high loads.
| adjustable (axial) : | no |
| adjustabe (radial) : | yes |
| diameter Ø : | 77,7 mm |
| relubricable : | yes |
| Type : | 80 |
| material : | steel |
| load capacity radial: | 12,87 kN |
| load capacity axial: | 11,00 kN |
| C: | 48,00 kN |
| C0: | 56,80 kN |
| C0a: | 18,00 kN |
| Ca: | 18,00 kN |
The suitable profile for SFE080.5200
Artikel-Nr.: UP080.0700
Artikel-Nr.: IP080.0800
the suitable equipment for SFE080.5200
Artikel-Nr.: BQ080.1405
Artikel-Nr.: BQ080.1410
